Ultraviolet and Visible Light Curing Adhesives

These one-component, solvent-free LOCTITE adhesives can be applied to a variety of different substrates. They are available in a wide viscosity range (100 to 10,000 mPa·s) and cure rapidly (on demand) to form a tough thermoset polymer. The products are specially designed for automated dispensing and curing in applications where high strength, clear bondlines and a 100% seal are required.


Typical applications: Cannulae / Hubs
Product Viscosity (mPa·s) Max. Gap Properties Suitable Substrates
3011 100 4 mm Colour: Clear
(3081 fluorescent)
Stainless steel, thermoset
and thermoplastics
Typical applications: Glass assemblies and optical instruments
Product Viscosity (mPa·s) Max. Gap Properties Suitable Substrates
3051 1,100 4 mm Colour: Clear
(3942 fluorescent)
Excellent for glass and
optical applications
Typical applications: Bond subassemblies in blood pressure transducers, arteriograph manifolds, stop cocks, fittings, adapters and arterial filters
Product Viscosity (mPa·s) Max. Gap Properties Suitable Substrates
3201 4,000 13+ mm Colour: Clear
(3933 fluorescent)
Polycarbonate, acrylic and other
thermoplastics where a flexible
joint is desired
3211 10,000 13+ mm Colour: Clear
(3936 fluorescent)
Polycarbonate, acrylic and other
thermoplastics where a flexible
joint is desired
Typical applications: Bond and seal anaesthesia, surgical and other masks. Bonding tubing to fittings in IV sets, gas inlet and arterial outlet connections on membrane oxygenators 
Product Viscosity (mPa·s) Max. Gap Properties Suitable Substrates
3301 150 13+ mm Colour: Clear
(3921 fluorescent)
Metals and plastics
Best on rigid and flexible PVC,
giving a flexible joint
3311 300 13+ mm Colour: Clear
(3922 fluorescent)
Metals and plastics
Best on rigid and flexible PVC,
giving a flexible joint
3321 5,000 13+ mm Colour: Clear
(3926 fluorescent)
Metals and plastics
Best on rigid and flexible PVC,
giving a flexible joint
3341 450 13+ mm Colour: Clear
fluorescent
Best on highly plasticised PVC,
giving a flexible joint
Typical applications: Insulin glass syringes to metal needles
Product Viscosity (mPa·s) Max. Gap Properties Suitable Substrates
3345 1,500 4 mm Colour: Clear Glass and metals
Typical applications: Assemblies of coloured or temperature sensitive plastics, like purple tinted medical components or coloured cannula hubs
Product Viscosity (mPa·s) Max. Gap Properties Suitable Substrates
3554 300 15+ mm Transparent amber;
fluorescent
Metals and plastics, 
especially heat sensitive or
coloured plastics
3555 1,000 15+ mm Transparent amber;
fluorescent
Metals and plastics, 
especially heat sensitive or
coloured plastics
3556 5,000 15+ mm Transparent amber;
fluorescent
Metals and plastics, 
especially heat sensitive or
coloured plastics

 


Download our comparison chart to ultraviolet and visible light curing adhesives more...

Contact us now!
Videos & Literature