Structural Adhesives

LOCTITE high-performance structural adhesives provide high peel and shear strength on a wide variety of plastics, metals and glass. When cured, these thermoset plastics offer superior thermal and chemical resistance, as well as high cohesive strength and minimal shrinkage. LOCTITE two-part epoxies are packaged in side-by-side cartridges, allowing them to be dispensed as easily as any one-part system. Heat cured one component products have the advantage of easy dispensing and fast cure.


Typical applications: Cannula / Hub
Product Viscosity (mPa·s) Max. Gap Properties Suitable Substrates
9535 18,000 1 mm Colour: White
fluorescent
Low temperature
cure (>80 °C)
Metals, ceramics, glass,
rigid plastics  
Typical applications: Bond/seal endoscopes, bond/seal catheters, bond/seal artherectomy devices, bond/seal blood heat exchangers, bond/seal syringes and dental instruments, surgical and orthopedic handheld tools, powered instruments
Product Viscosity (mPa·s) Max. Gap Properties Suitable Substrates
M-21HP 37,000
(mixed)
1 mm Colour: Off-white
tough
Metals, ceramics, glass,
rigid plastics  
M-31CL 6,000
(mixed)
0.5 mm Colour: Clear
Low viscosity
Metals, ceramics, glass,
rigid plastics  
M-121HP 11,000
(mixed)
1 mm Colour: Amber
Peel resistant
Metals, ceramics, glass,
rigid plastics  

 


Download our comparison chart to structural adhesives more...

Contact us now!
Videos & Literature